DC2000 Suspended Solids Analyzer

Digital monitoring and transmission for suspended-solids measurements.

MLSS range: 0–120,000 mg/L, subject to connected sensor
Platform turbidity range: 0–4,000 NTU with corresponding sensor
Other supported variables: pH, ORP, dissolved oxygen, saturation and conductivity; configuration dependent

Request a quote Technical specifications

Select the measurement range, process connection and output configuration for your application.

PRODUCT OVERVIEW

Understand the instrument

Configured with a compatible solids sensor, the DC2000 supports online suspended-solids or MLSS observation. Current output and RS485 communication connect the reading to supervisory equipment. This is a configurable analyzer platform; verify the sensor, range and installation arrangement for the actual process.

KEY FEATURES

Designed for the task

Online TSS/SS or MLSS integration
Process-signal connection options
Local measurement indication
Relay outputs for control integration

TECHNICAL DATA

Specifications at a glance

Values below describe the listed product family. Optional ranges and functions depend on the selected configuration.

DC2000 Suspended Solids Analyzer — technical specifications
Parameter	Specification
MLSS range	0–120,000 mg/L, subject to connected sensor
Platform turbidity range	0–4,000 NTU with corresponding sensor
Other supported variables	pH, ORP, dissolved oxygen, saturation and conductivity; configuration dependent
Communication	RS485, Modbus-RTU
Analog output	4–20 mA; maximum loop 500 Ω; 0.2% FS
Relay output	250 VAC / 3 A
Power supply	100–240 VAC; optional 24 VDC
Operating temperature	0–60 °C
Relative humidity	10–85%, non-condensing
Dimensions	100 × 100 × 150 mm

Confirm the final measuring range, material compatibility, operating limits and applicable approvals for the exact configuration before ordering. Product appearance may vary by version.

APPLICATION AREAS