A100 Electromagnetic Flowmeter

Volumetric flow measurement for electrically conductive liquids, with no moving parts.

Nominal diameter: DN10–DN1000
Flow velocity reference range: 0.5–5 m/s
Accuracy: ±0.5% of measured value; ±0.3% for selected sizes within the stated velocity range

Request a quote Technical specifications

Select the measurement range, process connection and output configuration for your application.

PRODUCT OVERVIEW

Understand the instrument

The A100 uses electromagnetic sensing to measure liquid flow in closed pipelines. Liner and electrode options allow the wetted materials to be matched to the medium. Analog, pulse and digital outputs connect the measurement to a wider control system. Review conductivity, pipe size and straight-run requirements before selection.

KEY FEATURES

Designed for the task

No moving parts
Selectable liners and electrode materials
Analog and digital integration options
Integrated and remote configurations

TECHNICAL DATA

Specifications at a glance

Values below describe the listed product family. Optional ranges and functions depend on the selected configuration.

A100 Electromagnetic Flowmeter — technical specifications
Parameter	Specification
Nominal diameter	DN10–DN1000
Flow velocity reference range	0.5–5 m/s
Accuracy	±0.5% of measured value; ±0.3% for selected sizes within the stated velocity range
Repeatability	0.16%
Minimum conductivity	50 µS/cm
Power supply	100–240 VAC, 50/60 Hz; 20–28 VDC
Power consumption	≤15 W
Communication	RS485, Modbus-RTU; optional HART
Medium temperature by liner	CR: −10 to 70 °C; PU: −10 to 60 °C; PTFE/F46: −10 to 120 °C
Pressure by size	DN10–DN250: below 1.6 MPa; DN300–DN1000: below 1.0 MPa; special versions by configuration
Reference straight runs	Inlet ≥10 DN; outlet ≥5 DN

Confirm the final measuring range, material compatibility, operating limits and applicable approvals for the exact configuration before ordering. Product appearance may vary by version.

APPLICATION AREAS